Gear selection problems |
Post Reply |
Author | |
enbee85
New Member Joined: 18 November 2013 Location: Nottingham Status: Offline Points: 4 |
Post Options
Thanks(0)
Posted: 18 November 2013 at 00:19 |
Hi.
Hope someone can help I have a 51 reg Nissan almera. Having problems selecting 1st gear and reverse. I really have to force it in and when its in reverse it won't release. I cannot find my hydraulic fluid to test levels either. Maybe I am blind. Only had the car 6 weeks so a bit peeved Thanks guys |
|
Ratchet
Moderator Group Joined: 29 July 2012 Location: Birmingham Status: Offline Points: 221 |
Post Options
Thanks(0)
|
For some cars the clutch & brake fluid are in the same reservoir (the brake fluid reservoir) this is normally located on the bulkhead under the bonnet. IF the fluid is low FIRST check your brake pads as the fluid will drop as your pads & clutch wear down, if your brake pads are ok then I would have the system topped up (with the right fluid type)and bled properly to make sure there is NO air in the system.
Once that has been done I would ask the mechanic to check the bite point of the clutch...this should be pretty close to floor as you release the clutch. If the bite point is all good then there could be an issue with the gearbox. Hope this helps |
|
Qualified ABC Diploma Level 1 & City & Guilds Level 2 Mechanic
|
|
enbee85
New Member Joined: 18 November 2013 Location: Nottingham Status: Offline Points: 4 |
Post Options
Thanks(0)
|
Thanks for your reply. Yep the gearbox has gone. Not happy.
|
|
Ratchet
Moderator Group Joined: 29 July 2012 Location: Birmingham Status: Offline Points: 221 |
Post Options
Thanks(0)
|
Not the best of times to have a gearbox go out.
You can get them on ebay and other local scrap yards quite cheap, Since you'll have the gearbox off the car you might as well put a new clutch kit in while your at it and also check with Nissan on the service life of the clutch slave cylinder as some need to be changed when the clutch is changed as they have weak seals. Might be a bit costly now but in the long run it will save you cash. |
|
Qualified ABC Diploma Level 1 & City & Guilds Level 2 Mechanic
|
|
enbee85
New Member Joined: 18 November 2013 Location: Nottingham Status: Offline Points: 4 |
Post Options
Thanks(0)
|
Do u know roughly how much? Always before xmas isn't it. Grr
|
|
Ratchet
Moderator Group Joined: 29 July 2012 Location: Birmingham Status: Offline Points: 221 |
Post Options
Thanks(0)
|
Yeah, always the way, everything before Christmas or just after..
Just did a quick search on ebay...nothing in detail but I'm seeing some on there for £80-£200 plus delivery or collection in person. Worth shopping around some local scrap yards around Nottingham or even Lincoln...There's one in Skellingthorpe, Lincoln called Mr Mole, he's really good (known him since I was old enough to sit under a car and take bits off..lol..I grew up in Lincoln) There's some others dotted around Lincoln and Nottingham so it's worth making phone calls. |
|
Qualified ABC Diploma Level 1 & City & Guilds Level 2 Mechanic
|
|
Ratchet
Moderator Group Joined: 29 July 2012 Location: Birmingham Status: Offline Points: 221 |
Post Options
Thanks(0)
|
Also make sure the gearbox number match with you old gearbox...
|
|
Qualified ABC Diploma Level 1 & City & Guilds Level 2 Mechanic
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |